Welcome to visit Tenet/Dliyun website !   Inquiry to overseas@chinatenet.com
简体中文

SHENZHEN TENET TECHNOLOGY CO., LTD.

SHENZHEN DELIYUN IOT TECHNOLOGY CO., LTD.

NameDescriptionContent
Security products since 2001.
HOT SALE
HOT SALE
Q: How to deal with the common faults of the barrier in the parking lot system?
Source: | Author:chinatenet | Publish time: 2019-01-16 | 1498 Views | Share:
Nowadays, the parking lot is already a daily need, and the gate system is the electromechanical integration equipment at the core of the parking system. The bearer parking lot controls the movement of the barrier in and out of the vehicle to ensure the normal operation of the parking lot. So since it is an electromechanical device, there will always be some faults. How do you deal with the common faults in the parking system in the parking lot system? Let's take a look.
Nowadays, the parking lot is already a daily need, and the gate system is the electromechanical integration equipment at the core of the parking system. The bearer parking lot controls the movement of the barrier in and out of the vehicle to ensure the normal operation of the parking lot. So since it is an electromechanical device, there will always be some faults. How do you deal with the common faults in the parking system in the parking lot system? Let's take a look.

No

Question

Reason Analysis

Solution

1

Motor running, but barrier arm does not run.


11

12


1. Whether capacitor is connected with the main controller.

2.Photoelectric limit switch line is connected with the main controller

1.The two lines of the capacitance are connected to the main controller of the motor forward /reverse interface.

2.The optical limit switches 4cable is properly connected to the main controller interface.

2

Barrier arm in the process of running has shake

1.Spring counterweight isn’t match.

2.Barrier chassis isn’t firmly fixed.

1.Fine-tune the spring force by the spring rod.

2.The barrier enclosure is firmly fixed.

3

Barrier arm in place isn’t horizontal or vertical.

Optical limit switches in the block-rays don’t tune in place.

Reference the “fine-tuning of photoelectric limit switch.”